Product Details

Electric immersion heaters are typically inserted directly into a pipe, tank, or vessel to heat process gases or liquids. Since the heat is generated by electricity, virtually all of the energy is consumed by the product being heated. As a result, the liquid is heated near 100% efficiency with standard elements constructed of Alloy, these heaters are designed to heat a variety of fluids and maintain corrosion resistance. Immersion heaters can be classified on the basis of direct heating & Indirect Heating.

Dynomech Tubular heaters are the most versatile and the best suited solution to a large number of applications. Inside the metal tube, a heater coil is embedded and electrically insulated with magnesium oxide. The optimized structure and high density of of magnesium oxide form the basis for the excellent mechanical and thermal characteristics. It can be fitted with Thermostat and RTD for temperature control.

Dynomech manufactures standard tubular heaters for any application. Tubular heating elements are a versatile and economical heat source for a wide variety of industrial and commercial applications. Standard diameters are available and other special sizes also available. Standard sheath materials range from copper and steel to stainless steel tubular heaters and Incoloy alloys. Special sheath materials may be available based on diameter and size of the element required. Standard terminations include a threaded stud, threaded bulkhead, screw lug, quick disconnect spade, ceramic-to-metal hermetic, and molded rubber lead, conventional lead wire terminal assembly and more. Flexible lead wire extensions or other mounting options are available for specific applications.

Dynomech Industrial flange immersion heaters provide heating solutions for fluid freeze protection and winterizing, hot or warm water storage, rinse tank heating, process chemical reactors, water-glycol heating, parts cleaning, plating and finishing chemicals, waste oil, wash systems and numerous other thermal heating applications. Dynomech flange heaters are designed to provide our customers with a long-lived, dependable, trouble-free heater for their application requirements. A properly designed flange heater will provide a high degree of efficiency as the energy that is generated is quickly dissipated directly into the medium that is being heated.

Typical heating mediums include:

• Process Air
•  Heat transfer oils
•  Clean water
•  Process water
•  Lube and fuel oils
•  Mild and corrosive solutions
•  Wax and molasses

Dynomech Tank Heaters are uniquely designed to heat large storage tanks located above or below ground and containing highly viscous fluids or heat sensitive materials. We offers uniquely designed electric heating systems for large storage tanks. Dynomech tank heaters have several advantages in storage tank applications due to the precise control of temperature and heat distribution required for liquid storage conditions. Each industrial heater solution is designed for the specific application and optimized to ensure high performance results. We take into account temperatures, flows and mixing, viscosity of the fluid, corrosive nature of the fluid, tank insulation and the overall operating conditions and project requirements.

We manufactures a variety of standard designs as well as customized solutions for a variety of tank heating applications including open or closed tanks, outdoor or indoor installations, as well as underground tanks, pressure vessels, and even railroad tank cars and over the road trailer tanks.

Dynomech designs, manufactures and supply customized suction heaters based on the needs of each customer and project. Our Suction heaters are used to heat products inside storage tanks, especially when these products are solid or semi-solid at low temperatures. To pump and transport these properly, their viscosity must be reduced and fluidity increased by heating with the suction heaters.

Suctions heaters are design to heat only that amount of liquid that is to be pumped from large storage tank. The delivery nozzles of suction heater are attached to the pump. The suctions heaters heat the liquid inside the heater body shell and dawn through the heater.

Dynomech manufactures electric circulation heaters, also referred to as "in line heaters," which effectively heat high viscosity fluids, flowing air and gases. Non-pressurized or highly pressurized fluids can be heated very efficiently using direct circulation heating.

Using standard Tubular type heating elements & replaceable bobbin type heating elements designs, Dynomech can offer a wide variety of circulation heaters with various power ratings, materials, sizes and flow capacities. Standard designs allow for quick replacement and retrofit. Custom-engineered circulation heater units designed with various options to fulfill most any industrial or process heating application.

Applications include: Water Heating, Freeze Protection, Heat Transfer Oil Heating, Fuel Oil Heating, Steam, Air, and Gas Heating and others

Dynomech manufactures a variety of industry standard process air heaters with carbon steel mounting flanges, stainless steel support rods, element support spacers, and insulation collar. We also provide custom-engineered electric air heaters that are well suited for the needs of many heavy-duty industrial and process applications. Offering custom sizes, volts, watts and watt densities, temperature sensors, thermostats and temperature control panels.

These heaters are manufactured out of high temperature resistance Stainless steel/incoloy tube to withstand surface temperature of up to 600°C. Customer specific fitment options are possible such as adjustable fixing brackets./brass nipple/flange etc. Different shapes are available to meet customers’ needs: M shaped, U shaped, etc. These air heaters are available in different KW ranges and capacities. Some of the types of these air heaters are Tubular Air Heaters, Finned Strip Heaters etc. These are developed and fabricated using high quality materials SS 304 and nickel chrome.

Dynomech Duct heaters are commonly used to heat air and gas process streams in process heating or environmental room applications. Applications include: humidity control, machinery pre-heating, HVAC comfort heating. Our Air duct heaters are designed and manufactured either as part of our standard range or as a customized solution (power, voltage, dimensions, material, etc.) These heaters have the capability to heat large amount of air. It contains the special feature to warm up as well as cool down the air within a period of time. This kind of industrial heater is designed in a very versatile manner which has the features to use in any commercial and industrial applications.

The hazardous Explosion-Proof duct heaters are designed for heating air or gases in hazardous environments where potentially explosive substances are present, such as oil refineries, coal mines, petrochemical plants and sewage treatment plants.

Dynomech is manufacturer and supplier of Hot Air Blower that are endowed with robust construction and brilliant finish. Addition to this, our products are highly appreciated inspired by their elegant design and high efficiency. We are committed to introduce our best manufactured product targeting at giving our esteemed clients. For fitting the variegated requirements of our patrons,

Dynomech Manufacturing of industrial hot air blower as per customer requirement. We are also customized design work as per customer requirement application.

Dynomech manufactures wide range of Explosion-Proof Heaters. Our Explosion heaters renowned for its rugged, reliable and versatile heavy-duty explosion-proof heaters. Our explosion-proof electric heaters are designed for hazardous industrial locations where the potential for explosion exists due to the presence of flammable gases, vapors, powdered-metals, or dust.

Exlosionproof heaters are certified by CIMFR & ATTEX approved Terminal Boxes & Junction Boxes and can be used in all applications where flame proof enclosure is needed.